Shop Fox M1112 12-Inch by 36-Inch Gunsmithing Lathe

$ (as of March 16, 2020, 10:26 am)4,918.99 (as of March 16, 2020, 10:26 am)

Spindle Bore: 1-5/8-Inch, D1-5 Camlock Mount
Range of speeds: 70, 200, 220, 270, 360, 600, 800, 1000 and 1400 RPM
Includes: 6-Inch 3-Jaw chuck with two sets of jaws, 8-Inch 4-Jaw chuck with reversible jaws, 10-Inch faceplate, set of six change gears, 1/2-Inch chuck w/ MT3 arbor

Buy Product

Description

Shop Fox M1112 12-Inch by 36-Inch Gunsmithing Lathe

Feature-packed with Gunsmiths in Mind
View larger

Carriage Controls & Cross Slide
View larger

Ground gears & high Precision bearings inside
View larger

This superb gearhead lathe is in the “bull&aposs eye” with its high-tolerance bearings, D1-5 camlock spindle, outboard spindle bore supports, quick change gearbox, induction-hardened bed ways, and its extra fine longitudinal feed rate of 0.0011 inches/r and cross feed rate of 0.0004 inches/r. Other features include a heavy-duty vibration dampening stand, ball bearing tipped follow rest and steady rest, and a tailstock that may be tightened with a torque wrench to care for precise chuck-to-tailstock alignment every time the tailstock is locked down. Although you aren&apost a gunsmith, you&aposll be able to appreciate all of the precision and features this lathe offers.

Quick Change Toolpost

The included quick change tool post permits you to increase the speed of your lathe operation. The Tool post features a piston type mechanism and comes with one tool holder.

Ground Gears & High Precision Bearings Inside

The M1112 has been specifically designed to provide many years of trouble-free service. With close attention to detail and precision built parts such as the ground gears and high precision bearings, you&aposll look forward to many years of reliable operation.

Standard Equipment:

6 inch 3-Jaw chuck with two sets of jaws, 8 inch 4-Jaw chuck with reversible jaws, 10 inch faceplate, steady rest, follow rest, quick change toolpost with one tool holder, two MT #3 dead centers (one carbide-tipped), one MT #3 live center, set of six change gears and 1/2 inch drill chuck with MT #3 arbor.

Specifications & Features
  • Swing over bed: 12 inches
  • Distance between centers: 36 inches
  • Swing over gap: 17 inches
  • Swing over cross slide: 7 inches
  • Swing over saddle: 11-11/32 inches
  • Cross slide commute: 6-1/4 inches
  • Compound commute: 3-1/4 inches
  • Carriage commute: 24 inches
  • Spindle speeds: 9 at 70, 200, 220, 270, 360, 600, 800, 1000 and 1400 RPM
  • Spindle bore: 1-5/8 inches
  • Spindle nose: D1-5 camlock
  • Spindle taper: MT #5
  • Motor: 2 HP, 220V, single-phase, 12A, 1725 RPM
  • Bed width: 7-1/4 inches
  • Tailstock barrel taper: MT #3
  • Tailstock barrel commute: 4 inches
  • Leadscrew: 8 TPI
  • Longitudinal feed range: 40 at 0.0011 inches – 0.0311 inches
  • Cross feed range: 40 at 0.0004 inches – 0.0105 inches in./rev.
  • Thread range (inch): 40 at 4-112 TPI
  • Thread range (metric): 29 at 0.2-4.5mm
  • Maximum tool size: 5/8 inches
  • Overall dimensions: 61 inches L x 26 inches W x 54-1/2 inches H
  • Approximate shipping weight: 1410 lbs.
  • Removable gap bed allows turnings up to 17 inch diameter
  • Easy to use lever controls
  • Hardened and ground cast iron bed
  • Full length splash guard
  • ON/OFF reverse switch on carriage
  • Halogen work light
  • Ball bearing steady/follow rest
  • Outboard end enhance screws
  • Socket for tailstock lock
  • Cast iron stand with extended base
  • Cast aluminum gear cover

Spindle Bore: 1-5/8-Inch, D1-5 Camlock Mount
Range of speeds: 70, 200, 220, 270, 360, 600, 800, 1000 and 1400 RPM
Includes: 6-Inch 3-Jaw chuck with two sets of jaws, 8-Inch 4-Jaw chuck with reversible jaws, 10-Inch faceplate, set of six change gears, 1/2-Inch chuck w/ MT3 arbor
Halogen work light, coolant system, ball bearing steady and follow rests, quick-change tool post included
Cast iron stand with extended base, cast aluminum gear cover, ground gears and high precision bearings, hardened and bround V-ways